Sunday, November 3, 2013

42u server rack

42u server rack .The JSNA Server Cabinet series is seismic rated to satisfy the Uniform Building Code seismic zone 4 and International Building Code seismic use group III upper floor test rating requirements for protection 600 lbs of essential equipment with optional JSE floor anchor brackets.
JSNA Series Server racks are designed and built to hold computers, servers, monitors, kvm switches, patch panels, network equipment, production bench test equipment and other electronic equipment. Server racks are used in a variety of industries
such as computers/technology, finance/banking, manufacturing, medical and almost any corporate setting that could benefit from vertical storage of equipment. Server racks are an extremely important component of any network. Quite often server racks are overlooked as just 'another piece of hardware' or categorized under office furniture or shelving. Finding the right server racks can increase the protection, security and ease of management of any network. Server Racks also save valuable floor space and add a professional appearance to your facility.

Server Rack Size/Capacity- is one of the most important considerations, not only to make sure that the server rack has the right dimensions (height, width and depth), but also how the server racks will fit into the operating environment. This means checking the usable (inside) dimensions and the overall (outside) dimensions. You'll want to determine if freestanding, desktop or wall-mounted server racks will work best for your equipment and environment, although most server racks that house more than one server are generally freestanding. Check the weight capacity of the server rack to make sure it will work for your anticipated network equipment load.
Mat. : Steel

● Accord with ANSI/EIAR-310-D DIN41491 ; PART1 、 IEC297-2 、 DIN41494 ; DART7 GB/T3047-92 standard, compatible 19”international standard, metric system standard and ELSL standard .

● Frame is made of nine style and high quality special santong, firm structure, can bear large weight .

● We use high density mesh front and back doors to ventilate dissipate heat.

● The front door use international fashion color of toughened glass door.

●.You can remove or install right and left sides-door quickly to convenient working.

● You can set ten-thousand leg-wheel and supporting let at the same time, which can convenient moving and fixture.

● Interchangeable of door hinge.

● There is rubber-cover on the top .

● Depth can adjust (unit:25mm),interval and highness of content.

●.Surface treatment: deoiling, phosphorization,electrophoresis priming, electrodusting.

● Color: computer gray and black

●.we use high quality cold steel sheet, material thickness: corner edge 2.0mm, others:1.2-1.5mm.

● International quality of console and interchangeable of fitting

● We can customize all kinds of specification and opening aperture base on customer's requirement .


Specification  : 



Order Code
Capacity (U)
Width(mm)
Depth(mm)
JSNA6647
47U
600
600
JSNA6847
600
800
JSNA6947
600
900
JSNA8647
800
600
JSNA8847
800
800
JSNA8947
800
900
JSNA6642
42U
600
600
JSNA6842
600
800
JSNA6942
600
900
JSNA8642
800
600
JSNA8842
800
800
JSNA8942
800
900
JSNA6637
37U
600
600
JSNA6837
600
800
JSNA6937
600
900
JSNA8637
800
600
JSNA8837
800
800
JSNA8937
800
900

Jaunty-Fabricator not only provides competitive prices, excellent quality but also helps customers to solve technical problems, improve quality, reduce extra costs, and assist customers to become more competitive.

As a professional Cabinet Rack supplier. We can also offer customized 19" Cabinet Rack, Server Cabinet, Server Rack Cabinet, Network Cabinet Rack, Enclosure Cabinet Rack, Server Rack Cabinets, 4 Post Cabinet Rack, Data Cabinets Rack and Zone 4 Cabinet.


42u server rack
JSNA-SE_Series-01-FrontView
42u_server_rack
JSNA-SE_Series-02-OpenView
42u server rack
JSNA-SE_Series-03-45AngleView

 
 42u server rack
JSNA-SE_Series-04-SideView
 42u server rack
JSNA-SE_Series-05-RearView

 
 server rack
JSNA-SE_Series-06-RearOpenView
 server rack
JSNA-SE_Series-07-45AngleRearView

 
 server rack
JSNA-SE_Series-08-TopInnerView
server rack
JSNA-SE_Series-09-Inner
server rack
JSNA-SE_Series-10-BottomInner
server rack
JSNA-SE_Series-11-TopView

 
server rack
JSNA-SE_Series-12-ZoomIn_TopView
server rack
JSNA-SE_Series-13-ZoomIn

 
  
server rack
JSNA-WE_Series-01-FrontView
server rack
JSNA-WE_Series-02-45AngleView

 
server rack
JSNA-WE_Series-03-SideView
server rack
JSNA-WE_Series-04-OpenView

 
server rack-19"Cabinet Rack
JSNA-WE_Series-04-RearView

 
server rack 19"Cabinet Rack JSNA WE Series
JSNA-WE_Series-05-TopInner
server_rack_Cabinet_Rack/JSNA-WE
JSNA-WE_Series-06-BottomInner

 
server_rack / Cabinet Rack/JSNA
JSNA-WE_Series-07-Inner
19 Cabinet Rack/server_rack JSNA-WE
JSNA-WE_Series-08-ZoomIn_TopView

 
server_rack 19 inch Cabinet_Rack
JSNA-WE_Series-09-ZoomIn
server_rack .19_Cabinet_Rack
JSNA-WE_Series-10-TopView

 
 
   

Wednesday, October 30, 2013

Eric Series 19 rack cabinet(Server Rack)

Description : 
ERIC Series 19 rack cabinet, constructed of heavy duty steel for the ultimate server rack strength and stability. Our parts are machine finished and powder coated for extended use and wear. Vertical Mounting Rails offer a square hole universal mount (EIA-310) for any brand server. Front to Rear Airflow is achieved with our unique Glass/Perforated Front Door, and Fully Perforated Rear Door with additional venting on Top. Our Server Rack Cabinets are value packed with 6 Mounting Rails, Locked Doors & Sides, Heavy Duty Casters, Cage Nut Hardware, Cable Management and are Shipped Fully Assembled

Mat. : Aluminum
Cabinet Rack series:19" Cabinet Rack, Server Rack, Rack Cabinets, Rack Mount Instrument, Server Racks, K/D Server Rack more.....

Product Features:
● Production based on ANSI / EIARS-310-C, D, E, F standards by UL & CE certification, as well as MIL-STD-167 standards.
● Using aluminum extrusion aluminum aluminum as the main pillar column , made of : AL6063T5.
● Activities aluminum columns can be arbitrarily set located in front of the cabinet in order to achieve the actual demand ; when extended to outside the cabinet depth 900mm, deep within
   Remained 750mm. Their holes meet ANSI / EIA RS-310C specs, with shrapnel nut adjustable Server vertical position .
● group tempered glass front and back doors and turn off cellular Confucian style to choose from, along with locks and keys Hyperlink Tibetan or password lock.
● standard with six -hole strip a group , and the other can be installed grounding copper strips , each panel screws attached to the chassis 50 groups and 50 groups of shrapnel nuts .
● If the cabinet must extend to 630mm Width , the active aluminum column maintained at 19 inches Width .
● front and back doors . Sides and upper and lower frame appearance without screws or nuts and other parts which affect the overall appearance ; cabinet above the standard with two
   Groups outside pumping fan , Customers may install the fan group needs .
● side installation is freely removable , just hands down the fastener , side panels and the cabinet body naturally separated without additional use of any tools
   , With multiple cabinets in parallel , neat , beautiful, to make room lower maintenance costs.
● with Internet connection , wiring space reserved for left and right side , reduce maintenance and increase management efficiency ; bottom plate for the multi-piece modular , easy
   Extended conversion and demolition .
● Jia Feng cabinet series are all using electrostatic powder coating paint , the advantages of dust , oxidation resistance, easy to scratch , acid ; standard colors :
   IBM white, sand black series.
● Use the right angle connector key is used to connect the chassis and floor as fixed to the rack with screws through the raised floor lock on the cement floor to achieve shock effect .
● equipped with a brake wheel , making the cabinet is not easy due to external and shaking , and the other horizon screws can be installed in order to maintain the balance of the cabinet .

Specification  :  
Model
Standard size(U)
Outer Width (mm)Width
Outer D(mm)
Eric-41-90
41U
630
900


Outside the high free wheel high( 85mm), 1U= 1.75 Inch= 44.45mm


Dimension  :
19 Rack Cabinet

Images  :
proimages/19_Cabinet_Rack/Eric_Series_1.jpg 



We have greatest experience and technique in manufacturing any kind of Server Rack, such as 19" Server Rack, Server Cabinet, Server Rack Cabinet, Server Rack Cabinets, Server Rack Cooling, K/D Server Rack and Cabinet Server Rack.

We also design and manufacture new models / products according to buyer's request.
Your any requirement is welcome.

Jaunty-Fabricator not only provides competitive prices, excellent quality but also helps customers to solve technical problems, improve quality, reduce extra costs, and assist customers to become more competitive.

Welcome to server rack enclosure Solutions' the Jaunty-Fabricator

 
Jaunty-Fabricator International Enterprise Co., Ltd. ( Jaunty-Fabricator Enterprise Industrial Co.., Ltd. .), founded in 1999 was 12 months. By a group should express service ( Fast Service ), high-quality products ( Best Quality ) and good profit ( Nice Profit ) and customers to share founded by young people, but also because of this, we have developed the pace has been continued unabated. 

Jaunty-Fabricator (JF) Server Rack Combo Series is based on the ANSI / EIA RS-310-C, D, E, F, 19 inch / ETSI / and IEC-297-3 metric standard specifications and manufacturing and the need to pass UL and CE certification, and seismic testing ML-STD-167 , its aluminum cylinder of circular shape, can be better achieved in a rack in parallel after its desired function and easy to assemble, special design, can be widely used to monitor room, Electronics Computer room, communications information, the satellite ground station, the MRT system monitoring room, television, CTI voice 25.The inspection system, automatic control systems, network equipment, data room, CO.-LOCATION. IDC ...... and so on. 

And in order to more realistically meet domestic customer base to expand overseas market demand, Jaunty-Fabricator (JF) server rack specifications are developed by the export special DIY package, or whether it is a small amount of order and cabinet loading, its small and compact volume, the greater the big to effectively control the cost of transportation, and to keep at home and abroad can make mobility market. Via the company's own professional R & D design, the Jaunty-Fabricator (JF) server rack may 10 to 15 minutes assembled. Allows you in the shortest time to complete all the annoying work. 
    
Jaunty-Fabricator (JF) believe that the arrival of the year two thousand in 2009, only professional and never-ending improvement, in order to create a new era of truly belongs industrial environment, and in the 19 -inch industrial computer field, we are committed to develops and manufactures a complete range of products, covered the 1 ~ 41U of Rack-mount Chassis and Cabinet Rack , and even Internet Web Server 's architecture, we usually are increasing refinement of objectives, in addition to the network server's Intranet Hub and non- power systems, we also combine several superior quality manufacturers to jointly develop a new generation of 19" serverrack product, and look forward to our R & D technology to provide domestic customer base to bring more business opportunities in overseas markets.